Current Vacancies
Please select from the list below for the vacancy that you wish to apply for. Please note that the facility to apply for a vacancy using the links below are currently unavailable. If you would like to apply for one of the positions advertised, please send your CV and covering letter to recruitment@peek-traffic.co.uk Please use the ‘subject heading’ to provide the title of the role you are applying for.
|
Scotland
Installer
Reports to: Installation Supervisor
Location: Glasgow
Salary Band B
Purpose of Job:
To help ensure that business objectives and contractual obligations, terms and conditions are met, ensuring compliance where applicable. To suitably and properly represent the Company both in quality of work and customer service.
To perform duties as allocated by the Line Manager and to supervise on site sub-contractors.
Key Responsibilities
- To market the activities of the business effectively at all times.
- To ensure that all working practices are in accordance with the ISO 9000 Quality System and Health & Safety Legislation at all times.
- To show a high level of professionalism demonstrating particular attention to customer service.
- To gain product knowledge on all Peek and other traffic related products.
- Ensure vehicle, tools, spares and equipment to be used are in a safe and useable condition.
- Ensure all paperwork including stock returns, timesheets, worksheets are completed in tidy and efficient timescales.
- To carry out tests to equipment and record as applicable to Installer standards.
- To liaise with customers on site if required and ensure that customer requirements are met.
- To carry out installation, modification and on street repair of traffic signal equipment as per customer requirements and in accordance with the contract.
- To assist the Engineer during commissioning and to ensure schedules and site layouts are correct.
- Provide technical support to Trainee Installers/Lamp Technicians when required.
- Any other duties as directed by the Line Manager.
The above responsibilities are indicative of the work required and should not be seen as an exhaustive list.
Nationwide
Engineers
Reports to: Lead Engineer
Location: Nationwide
Purpose of Job:
To carry out maintenance duties associated with the motorways network infrastructure.
Key Responsibilities
- To carry out fault rectification and routine maintenance on Highways Agency infrastructure, equipment and systems.
- To participate in an out of hours stand-by system, being called out to rectify faults as required.
- To ensure compliance with contract service level requirements.
- To assist in the planning and managing of installation and maintenance works.
- To red line update drawings and assist in maintaining the asset database.
- To carry out installation works.
- To carry out testing and commissioning of Highways agency equipment, infrastructure and systems.
- To work in accordance with ISO 9000 Quality Systems and Local Working Instructions.
- To work within Environmental and Health and Safety guidelines.
- To carry out risk assessments and method statements.
- To provide feedback for monthly reports.
- To provide reports for the senior engineer when necessary.
- To assist with the control of spares.
- Liaison with other organisations and assist with the co-ordination of site works, and sub contractors.
- To deputise for the senior engineer (as appropriate).
- To ensure customer satisfaction at all times.
- Ensure stock returns, timesheets and work sheets are completed in a tidy manner and within the required time scales.
- Ensure vehicles, tools, spares, company clothing and equipment are maintained in a ready and useable condition at all times.
- Promote the company services to all customers.
The above responsibilities are indicative of the work required and should not be seen as an exhaustive list.
Basingstoke
Senior Development Engineer
Reports to: Product Development Manager
Location: Basingstoke
Salary Band - E
Purpose of Job:
To create effective product designs and support Peek products throughout the supply chain.
Key Responsibilities
- To generate cost-effective solutions for new products or customer proposals, together with detailed estimates of equipment cost, development cost, development timescales and any significant technical risks.
- To generate modifications and additions to existing designs as approved via the change control process duly considering all factors associated with the change affecting product use, interoperability, product life expectancy etc
- On going product lifecycle support of existing and new products, assessment of in-service product performance including, fault analysis and reliability maintaining and where appropriate propose modifications.
- To provide regular reports to the Hardware Group Leader, indicating progress against agreed time and cost targets, and highlighting any unresolved technical issues.
- To ensure adherence to Company and Customer, Quality and Safety standards.
- To interface with the Highways Agency and other relevant regulatory bodies.
- To work closely with Production Engineering and the Drawing Office to ensure the smooth transition of product and engineering changes from design to manufacture.
- To ensure that all new products are fully documented, to allow them to be easily manufactured, installed and maintained.
- Where appropriate, to identify the need for self-training.
- To co-ordinate with other departments within the company to assist in identifying
best practice and avoidance of duplication of design effort. - Carry out other tasks as directed
The above responsibilities are indicative of the work required and should not be seen as an exhaustive list.
Senior Software Engineer
Reports to: Software Manager
Location: Basingstoke
Salary Band - E
Purpose of Job:
To contribute to the existing software design teams in order to develop software to quality, on time and to requirements.
Key Responsibilities
- Preparing design specifications at both a product and a module level for dissemination to the software team and/or customer
- Designing, developing and testing code
- Preparing test schedules at both a module and a product level
- Modifying existing software designs
- Ensuring that design work is performed in accordance with the company’s ISO 9001:2000 procedures
- Ensuring that source code configuration management and problem tracking tools are correctly used
The above responsibilities are indicative of the work required and should not be seen as an exhaustive list.
Buyer
Reports to: Supply Chain Manager
Location: Basingstoke
Salary Band - C
Purpose of Job:
- To procure component and assemblies to agreed plans for both mainline products and project requirement
- To develop partnerships and relations through liaising, meetings and negotiations with vendors to ensure deliveries within terms, conditions and company policies.
- To access potential clients and maintain measurement of supplier performance.
Key Responsibilities
- By the use of minimised numbers of suppliers, negotiate terms and conditions, placement of purchase orders and expedite to achieve maximum cost benefit to the company.
- To organise the placement of purchase orders to fill the MRP requirements each week and hence maintain component supply in accordance with the production plan.
- To effectively manage sub contractors ensuring that supplies meet Peek’s output plan.
- Plan and schedule main signal components from suppliers in order to meet Peek’s manufacturing plan
- Regularly review forecasts with all areas of the business for specified products and enter onto JDE One World at designated intervals.
- Run MPS and MRP reports as required.
- To continuously seek measurable improvement opportunities which will contribute to the company’s profitability.
- To liaise with other departments, exchanging information and giving purchasing support to their functions.
- To maintain records of supplier performance, communicating with each supplier to improve performance and or implementing corrective actions where necessary.
- Maintain accurate records on One World of supplier’s records, source details, lead times and prices. Recommend amendments to the approved supplier list.
- Resolving problems arising from unclear information on requisitions, specifications and drawings.
- To attend meetings and provide reports and product information as required.
- To support requirement for introduction of new parts and customer enquiries
- To ensure necessary support and control of engineering changes (ECR’s & Concessions) that directly affect purchased materials
IIf you are interested in applying for this role, please contact the HR Department for more details.
Electronics Technician
Reports to: Product Development Group Leader
Location: Basingstoke
Salary Band - C
Purpose of Job:
To assist the design engineers by producing prototypes and assembly of manufactured components. The role will also involve debugging faults in electronic equipment to component level with assistance from the designer and defining and building test equipment for use by Production.
Key Responsibilities
- Basic electronic design, soldering, printed circuit board and mechanical assembly.
- Given a circuit diagram, implementation (including cables, electronic circuits on breadboard, housing etc.) to acceptable safety standards.
- Checking operation of prototypes based on circuit diagrams and other drawings, identifying and correcting faults.
- Preparation of test equipment
- Preparation of test specifications
- Testing prototypes according to test specifications
The above responsibilities are indicative of the work required and should not be seen as an exhaustive list.
Project Engineer
Reports to: HA Projects Manager
Location: Basingstoke
Salary Band - E
Purpose of Job:
To support the Project Managers in HA Major Projects with the delivery and maintenance of systems to customers and to provide customer support in the resolution of technical issues.
Key Responsibilities
- Routine monitoring of the installed HADECS and Ramp Metering systems to identify and report faults, and to track faults through to resolution within contractual timescales through liaison with the Fault Management desk and on-site engineers.
- Provide project managers with reports on the operation of the maintenance regimes.
- Procure and assemble hardware components into subsystems and systems and following delivery, function test to confirm their suitability as required for the product.
- Produce and maintain hardware build documentation as required by the project quality plan.
- Provide reports on technical issues to the Project Manager and/or Projects Director and assist in the project planning process by providing accurate timescale estimates for any customer or internally generated change request.
- Define and maintain a suitable configuration management system for all hardware items used on the project including any third party items of equipment supplied for use by the project (including items on loan).
- Produce and maintain installation and commissioning plans, method statements and risk assessments as required for the projectand perform or assist as required with both factory and site acceptance tests
- Ensure that the mechanical and electrical installation of assembled systems is safe for use by others during the development phase of the project.
The above responsibilities are indicative of the work required and should not be seen as an exhaustive list.
London
Quinton
Manchester
New Works Technician
Reports to: New Works Senior Engineer
Location: Manchester
Salary Band B
Purpose of Job:
To work with the New Works team and carry out activities associated with the contract.
Key Responsibilities:
- Gaining a detailed and comprehensive knowledge of all equipment and systems being worked upon within by the New Works team on the Motorway Network
- Liaise with other members of the team in commissioning equipment and completing relevant test documentation.
The above are indicative of the work required and should not be seen as an exhaustive list.
Required skills and experience:
-
Previous experience of a motorways communications contract and have knowledge of the various equipment throughout the motorways network.
- City & Guilds or ONC in telecommunications or electronics
- Ability to adapt to changes in technology and develop new skills
- Ability to communicate at all levels
- A good awareness of health and safety
- A good team player with a ‘can do’ attitude and positive approach
- Ability to deliver in a fast paced environment
The above responsibilities are indicative of the work required and should not be seen as an exhaustive list.
Medway
St Albans
No Vacancies APPLYBACK TO TOP
Leicester
O&M Engineer
Reports to: O&M Field Manager
Location: Midlands
Salary Band C
Purpose of Job:
To carry out duties associated with the motorways network infrastructure, including O&M and installation of legacy and Alacatel core infrastructure.
Key Responsibilities
- To carry out installation, fault rectification and routine planned maintenance on GeneSYS and Highways Agency infrastructure, equipment and systems.
- To participate in an out of hours stand-by system, being called out to rectify faults as required.
- To ensure compliance with contract service level requirements.
- To gain a detailed knowledge of the contract requirements the equipment to be maintained.
- To have or gain a detailed and comprehensive knowledge of all existing and new equipment and systems throughout the network
- To assist in the planning and managing of installation and maintenance works.
- To red line update drawings and assist in maintaining the asset database.
- To carry out installation works.
- To carry out testing and commissioning of GeneSYS and Highways agency equipment, infrastructure and systems.
- To work in accordance with ISO 9000 Quality Systems and Local Working Instructions.
- To work within Environmental and Health and Safety guidelines.
- To carry out risk assessments and method statements.
- To provide feedback for monthly reports.
- To provide reports for the senior engineer when necessary.
- To assist with the control of spares.
- Liaison with other organisations and assist with the co-ordination of site works, and sub contractors.
- To deputise for the Lead Engineer (as appropriate).
- To ensure customer satisfaction at all times.
- To show a high level of professionalism at all times.
- Ensure stock returns, timesheets and work sheets are completed in a tidy manner and within the required time scales.
- Ensure vehicles, tools, spares, company clothing and equipment are maintained in a ready and useable condition at all times.
The above responsibilities are indicative of the work required and should not be seen as an exhaustive list.
APPLYBACK TO TOP
Leeds
West Cowick
CCTV Engineer
Reports to:Contract Supervisor
Location: West Cowick
Salary Band C
Purpose of Job:
installation and maintainance of motorways communication, detection and associated equipment on the Highways Agency motorway network.
Key Responsibilities
- You will also liase with clients to promote the companys service levels and work as part of the national team contributing to successful project delivery.
- Experience on Motorways or a communications background would be a distinct advantage.
-
Role will involve nights and out of hours weekend working due to traffic management restrictions for planned works and calls to maintain installed equipment. The position is subject to completeting security vetting
The above responsibilities are indicative of the work required and should not be seen as an exhaustive list
Ireland
Installer
Reports to: Installation Supervisor
Location: Ireland
Salary Band B
Purpose of Job:
To install, refurbish or repair traffic signals to customer specifications and ensure contractual obligations, terms and conditions are met. To suitably and properly represent the Company both in quality of work and customer service.
Key Responsibilities
- To install traffic signal equipment either on new or existing site to a high quality, this work includes:
- Check status of installation prior to commencement on site
- Installing and terminating cable
- Assembly, installation & termination traffic signal street furniture
- Installation of controllers
- Assist engineer on commissioning
- To carry out repairs on street furniture following RTA’s etc within contractual timescales.
- To be aware of individual contract requirements and complete additional worksheets for work “extra to contract”
- To be aware of individual customer requirements and specifications and complete work within the relevant timescales
- Competently liaise with both customer & supervisor to discuss problems, issues, programme etc.
- Ensure all relevant paperwork including stock returns, timesheets and worksheets are completed in tidy and efficient timescales
- To ensure that all working practices are in accordance with the Peek ISO 9000 Quality System and Health & Safety Legislation at all times
- To show a high level of professionalism demonstrating particular attention to customer service.
- To be available to attend training courses and tool box talks, whether they are locally or nationally based
- Ensure vehicle, tools, spares and equipment to be used are in a safe and useable condition
- Any other duties as directed by the Line Manager.
The above responsibilities are indicative of the work required and should not be seen as an exhaustive list.
Contract Supervisor (3 months)
Reports to: Contract Manager
Location: Ireland
Salary Band D
Purpose of Job:
- To help ensure that business objectives and contractual obligations, terms and conditions are met, ensuring compliance where applicable. To suitably and properly represent the Company both in quality of work and customer service.
- To help support the Regional Management Team in order to complete company objectives.
- To ensure maintenance contracts are run to the specification. Inspections, faults and chargeable works are carried out and profitability is maintained.
Key Responsibilities
- To liaise with customers to monitor and manage progress on contracts, whilst meeting contractual obligations.
- To liaise with Local Authorities and Contractors to review opportunities for securing business.
- iImproving skill levels within existing Maintenance Team.
- Responsible for ensuring customer satisfaction at all times and for resolving customer complaints in a timely, efficient manner.
- To attend/conduct regular meetings with customers as required.
- Manage and liaise with various sub-contractors to fulfill contractual requirements.
- Assist all staff with technical problems as and when required.
- Ensure vehicle, tools, plant spares and equipment to be used are in a safe and useable condition.
- Ensure all paperwork including stock returns, timesheets, worksheets are completed in tidy and efficient timescales.
- Any other duties as directed by the Line Manager.
- To market the activities of the business effectively at all times.
- To ensure that all working practices are in accordance with the ISO 9000 Quality System and Health & Safety Legislation at all times.
- To show a high level of professionalism demonstrating particular attention to Customer Service.
- To gain product knowledge on all Peek and other traffic related products.
The above responsibilities are indicative of the work required and should not be seen as an exhaustive list.