Controllers

Peek is one of the UK’s leading suppliers of traffic signal control equipment. Our equipment is designed and developed in house by our experienced technology team.

For more details of our traffic signal controllers, click on one of the following links:


TRX Controller

The TRX is Peek's traffic signal controller approved to TR2210. Available in up to 24 phase configurations, the TRX can be supplied with integral all-colour lamp monitoring and with semi-integral OTU. The mature firmware provides all the functionality necessary including special conditioning to meet the most demanding junction and pedestrian controller requirements. Integral speed assessment is provided as standard and is simply configured and tested. The controller also benefits from the PROM-Swap facility enabling the EPROM configuration to be changed without removing power to the controller. This controller is extensively used throughout the UK and abroad. For use in harsh environments a number of additional modules can be provided including lightning protection for phase-drive outputs.

  TRX Controller
VIEW LARGER

BACK TO TOP


TSP Controller

The TSP is Peek's pedestrian TR0141 traffic signal controller. The TSP provides the features of a full junction controller, with the economies afforded by using a smaller cabinet and an integrated design which reduces the number of circuit boards. The TSP is available in single and dual format with both variants having two separately monitored red lamp outputs per phase. As well as safety red-lamp monitoring the TSP has all-colour lamp monitoring included as standard.

  TSP Controller VIEW LARGER

BACK TO TOP


PTC-1 Controller

Peek’s newest controller designed to meet and exceed the requirements of TR2500 has numerous modern facilities and extensive future expansion capability. In its basic form it can be supplied with up to 36 phases, each phase having all-colour lamp monitoring as standard (including direct monitoring of a number of common LED signal types). No more configuration EPROMs are required as up to four configurations can be downloaded into the controller’s FLASH memory. The controller can switch from one configuration to another without the need to switch the controller off (this can even be done by time-of-day).

The PTC-1 has an integral quad OTU operating to MCE0361 protocol but additionally has an Ethernet interface with IP address, facilitating connectivity to wide area networks. Blue-tooth connectivity can be provided for remote handset interrogation via one of the USB ports. The controller also boasts an integral Web server enabling the Engineer’s terminal facility to be provided via web pages viewed on a standard web browser. Adequate inputs and outputs are provided for interfacing to discrete MOVA units and large amounts of detection.

 

PTC-1 Controller VIEW LARGER

 

PTC-1 ControllerVIEW LARGER

DOWNLOAD DATASHEET


BACKBACK TO TOP